Seed Commod 3 Drawers – Legs Kd – Standard Runenrs

The Seed Commod features three horizontal storage drawers housed within a rectangular frame constructed entirely from solid mindi wood. Mindi wood, known for its distinct straight grain and moderate density, forms the primary structural material for both the exterior body and the internal components of this cabinet. The visible surfaces display the natural light-to-medium brown tones and subtle texture characteristic of sustainably harvested mindi timber, finished with a clear protective coat that seals the wood pores without altering its organic appearance.

Measuring 160 centimeters in width, 64 centimeters in height, and 45 centimeters in depth, this credenza provides a low-profile storage footprint suitable for various interior layouts. The total volumetric displacement of the packaged unit is 0.4131 cubic meters, and the completed assembly weighs 46 kilograms. This weight distribution reflects the use of solid wood panels rather than lightweight particle board or hollow core alternatives, contributing to the overall structural stability of the furniture piece.

The front facade is dedicated to three equally proportioned drawers stacked vertically in a single column or arranged horizontally depending on the internal configuration. Each drawer operates on standard metal drawer runners, allowing the wooden boxes to extend smoothly along side-mounted tracks. The drawer construction utilizes traditional joinery methods to connect the front, back, and side panels, ensuring resistance to lateral stress during daily opening and closing cycles. The interior dimensions of each drawer provide adequate depth and width for organizing clothing, documents, household accessories, or media equipment. The drawer faces are unadorned by attached hardware; instead, the top edge of each drawer panel features an integrated finger pull or recessed bevel, maintaining a clean, uninterrupted wooden surface across the entire front elevation.

Supporting the main cabinet body are four detachable legs designated as KD (Knock-Down) construction. These legs arrive unattached from the main body of the commod to reduce shipping volume and facilitate easier transport through narrow doorways or stairwells. Metal threaded inserts embedded directly into the solid wood base of the cabinet receive heavy-duty bolts attached to the top of each leg. This fastening system allows the legs to be tightened securely against the underside of the cabinet using standard hand tools, creating a rigid connection that supports the 46-kilogram weight of the unit plus any stored contents. The legs taper slightly toward the floor, elevating the bottom panel of the cabinet approximately 15 to 20 centimeters above ground level, which creates an open space underneath for floor maintenance and visual lightness.

The top surface of the commod measures 160 centimeters by 45 centimeters, presenting a wide horizontal plane finished to the same standard as the vertical side panels. The perimeter edges of the top panel are cleanly squared with a slight radius on the sharp corners to prevent chipping and reduce tactile harshness. The back panel of the cabinet consists of a fitted plywood or solid wood backing screwed securely into the rear frame, squaring the entire case structure and preventing lateral racking.

Maintenance of the mindi wood surfaces requires simple dusting with a dry microfiber cloth. Periodic application of natural beeswax or furniture oil helps maintain the moisture barrier of the wood, preserving the matte or satin sheen of the clear protective finish. The standard metal runners can be lubricated with a silicone-based spray if drawer movement becomes stiff over extended periods of use. The combination of solid mindi wood, straightforward mechanical runners, and bolted knockdown legs results in a durable, serviceable storage unit designed for long-term interior utility.