Daybed Steve

The DAYBED STEVE is a substantial furniture piece crafted entirely from solid teak wood, measuring 210.00 cm in width, 85.00 cm in height, and 90.00 cm in depth. Weighing 73.50 kg with a total volume displacement of 1.6000 CBM, this daybed is built for stationary placement in living rooms, covered patios, or expansive lounge areas. Teak wood forms the primary structural foundation, visible across the entire frame, backrest, and armrests, offering natural resistance to moisture and decay due to its inherent dense oils.

The construction utilizes traditional joinery techniques, securing the thick teak components together to support the substantial weight of the piece and its occupants. The backrest spans the entire 210 cm length of the daybed, constructed with vertical wooden slats that maintain structural rigidity while reducing the overall visual mass of the back panel. The side armrests are integrated directly into the main frame, maintaining a uniform height of 85 cm from the floor to the top of the structure, aligning with the backrest to create a defined, enclosed seating area.

The seating platform sits at a measured height designed to accommodate standard mattress thicknesses or custom cushions measuring 200 cm by 85 cm. The base frame beneath the mattress platform consists of a slatted teak wood foundation, which allows air circulation underneath the cushioning materials to prevent moisture accumulation. The exposed teak surfaces display the natural grain patterns and warm honey-brown tones characteristic of mature plantation-grown teak, finished with a smooth sanded texture that leaves the wood pores unsealed.

Each corner joint utilizes reinforced mortise and tenon connections, visible upon close inspection, which distribute weight evenly across the four primary vertical support legs. The legs themselves are integrated directly into the main load-bearing frame, standing squarely on the floor without adjustable feet or casters. The depth of 90 cm provides adequate surface area for both seated postures with back support and horizontal reclining positions without requiring additional pull-out mechanisms or mechanical adjustments.

Maintenance requirements for the DAYBED STEVE involve periodic cleaning with a damp cloth and the occasional application of teak oil if the owner wishes to preserve the original dark honey color against ultraviolet bleaching. Left untreated in exterior covered spaces, the teak material gradually weathers to a silvery-gray patina while retaining its structural integrity. The hardware used in the assembly is corrosion-resistant metal, countersunk into the wood to prevent snagging on textiles or clothing placed on the daybed.

The overall silhouette relies on straight lines and ninety-degree angles, adhering to a strict rectilinear geometry. The top rails of the backrest and armrests feature flat surfaces with softly radiused edges, preventing sharp corners along the upper perimeter. The lower stretchers connect the legs approximately 15 cm above the floor level, adding lateral stability to the base assembly and preventing the frame from racking under shifting weights.

Delivery of the DAYBED STEVE requires adequate clearance through doorways and hallways due to the fixed dimensions of 210 cm by 90 cm and the heavy 73.50 kg weight, which typically necessitates two individuals for safe transport and placement. The item arrives either fully assembled or in modular sections consisting of the backrest, two side arms, and the main base platform, which lock together via heavy-duty internal steel fasteners. The combination of dense teak construction, specific dimensional parameters, and slatted framing defines the physical composition of this daybed.