Chair Rattan C12.01b

The CHAIR RATTAN C12.01B is a standalone seating unit constructed primarily from natural rattan material. Measuring 73.00 centimeters in width, 74.00 centimeters in height, and 77.00 centimeters in depth, this furniture piece occupies a spatial volume of 0.3500 cubic meters. The overall physical configuration follows a rounded lounge chair silhouette designed for indoor or covered semi-outdoor placement.

The structural framework utilizes thick-diameter rattan poles that form the primary load-bearing skeleton, including the legs, armrests, and perimeter of the backrest. These primary poles are bent using heat and pressure techniques to achieve the curved contours visible throughout the profile. Secondary, thinner rattan strands are woven in a dense lattice pattern across the backrest and seating pan to distribute weight and provide structural support without the use of solid wooden panels.

The backrest integrates seamlessly into the armrests, creating a continuous semi-circular barrier that wraps around the user. The height of 74.00 centimeters places the top of the backrest at a moderate level, supporting the mid-to-upper back depending on the user’s posture. The depth of 77.00 centimeters and the width of 73.00 centimeters establish a square-leaning footprint, allowing for a reclined seating posture where the legs extend forward into the open room.

The seat base is positioned at a height optimized for standard lounge seating, supported by a reinforced under-frame consisting of intersecting rattan stretchers that connect the four primary legs. These stretchers add lateral stability and prevent the frame from wobbling under shifting loads. The legs terminate directly on the floor, relying on the natural flexibility of the rattan material to absorb minor surface unevenness.

The material finish highlights the natural color variations inherent in harvested rattan, showing tones ranging from light straw yellow to deeper golden brown. A clear protective coating is applied over the raw material to seal the porous surface, protect against moisture absorption, and prevent splintering during regular handling. The bindings holding the structural joints together are executed using tightly wound wicker strips, secured in place with hidden fasteners and adhesive reinforcement to withstand daily tension.

Maintenance of the CHAIR RATTAN C12.01B requires dusting with a soft-bristled brush or vacuum attachment to prevent particulate accumulation within the woven crevices. Direct exposure to rain, standing water, or prolonged direct sunlight should be avoided to prevent material degradation, fading, and structural weakening of the natural fibers. The total spatial displacement of 0.3500 cubic meters must be accounted for during shipping, layout planning, and room configuration to ensure adequate clearance around surrounding furniture items.