Banana Arm Chair

The Banana Arm Chair is a solid teak seating unit measuring 78.00 cm in width, 86.00 cm in height, and 58.00 cm in depth. Weighing 17.00 kg and occupying a volume of 0.3200 cubic meters in transport, this chair utilizes plantation-grown teak wood throughout its primary frame and structural components.

Teak wood contains natural oils and rubber content that resist moisture penetration, fungal growth, and insect infestation without requiring synthetic chemical treatments. The dense grain structure of the timber provides high tensile strength and dimensional stability, preventing warping or cracking when exposed to fluctuating environmental humidity and temperature changes outdoors or indoors. Over time, unfinished teak exposed to ultraviolet light develops a silvery-grey patina on the surface while maintaining the structural integrity of the underlying wood fibers.

The backrest and armrests feature an integrated curved silhouette, which informs the designation of the model. This continuous sweep of wood is formed by steaming and bending solid teak sections to precise radii. The top rail of the backrest curves outward, measuring 78.00 cm across at its widest point, providing a broad contact surface for the upper back. The armrests slope downward from the backrest junction to meet the front legs at a height optimized for forearm placement.

Joinery methods rely on traditional mortise and tenon joints secured with teak dowels, avoiding visible metal fasteners on the primary surfaces. This construction technique distributes load stress evenly across the frame joints during use. The seat platform consists of closely spaced teak slats set within a reinforced rectangular frame, allowing air circulation and preventing water pooling on the seating surface.

The vertical dimensions consist of an overall height of 86.00 cm from the floor to the top of the backrest curve. The seat height sits at standard chair level, accommodating users comfortably without requiring additional cushioning, though the flat slat configuration accepts standard loose seat pads if desired. The four legs are tapered toward the floor, each fitted with a protective nylon glide to prevent scratching on indoor flooring surfaces and to elevate the end-grain of the teak above standing moisture when placed on outdoor patios, decks, or garden spaces.

The depth dimension of 58.00 cm provides a compact footprint suitable for placement around dining tables, in reading corners, on balconies, or as an accent seating option in hallways and reception areas. The 17.00 kg total weight makes the chair sufficiently heavy to remain stable in breezy outdoor environments while allowing manual relocation by a single person.

Maintenance requirements for this teak chair involve minimal intervention. Routine cleaning requires only mild soap and water applied with a soft-bristle brush to remove accumulated surface dust and organic debris from the slats and carved joints. Applying a penetrating teak oil is optional and serves primarily to preserve the original golden-brown honey color of the timber rather than to protect the wood from decay. Without oil applications, the wood maintains its mechanical strength while transitioning naturally to the aforementioned silver-grey finish.

The structural design accommodates daily sitting loads through balanced weight distribution across all four legs and the central seat supports. The curved armrests provide rigid lateral support, while the raked backrest angle matches the natural posture of the human spine during seated tasks. Every individual component of the Banana Arm Chair is precision-machined from raw timber stock, hand-sanded to a smooth finish with no exposed sharp edges, and assembled to meet rigid commercial and residential furniture specifications.