Armless Middle

The ARMLESS MIDDLE is an intermediate modular seating component constructed entirely from solid teak wood. Measuring 75.00 centimeters in width, 81.00 centimeters in height, and 88.00 centimeters in depth, this unit is designed to integrate seamlessly between other modular chairs to form larger sectional seating arrangements. With a volumetric measurement of 0.5300 cubic meters, the piece occupies a substantial footprint optimized for generous seating capacity.

Teak wood forms the structural backbone of the frame, chosen for its high natural oil content and dense grain structure. This timber exhibits inherent resistance to moisture, decay, and insect damage, making the furniture suitable for both indoor environments and covered outdoor settings. The visible surfaces of the teak are finished to highlight the natural wood grain, displaying variations in tone from medium honey brown to deeper golden hues. Over time, exposure to natural light will cause the raw teak to develop a silvery-grey patina unless treated with specific oils or sealers.

The structural assembly relies on traditional joinery techniques, utilizing mortise and tenon joints secured with teak dowels to ensure long-term stability under regular load. The backrest is fixed at a slight angle relative to the seat base, providing upright support without mechanical reclining mechanisms. Because this unit lacks armrests on both the left and right sides, it functions exclusively as a middle connector within a linear or curved sofa configuration. The vertical side profiles feature flush surfaces designed to abut directly against adjacent modular units, minimizing gaps between seats.

The seating platform consists of a slatted teak base designed to support loose cushions, though cushions are not integrated into the base wooden structure itself. The dimensions allow standard upholstery inserts to fit within the perimeter of the wooden frame. The rear legs extend upward to form the vertical supports for the backrest slats, distributing weight evenly down to the floor supports. The front legs are integrated directly into the primary seat frame, maintaining a consistent leg thickness that matches the horizontal rails.

Floor contact points are integrated directly into the bottom of the four legs, leaving solid wood in direct contact with the flooring surface, which allows for straightforward leveling on flat indoor flooring. The overall weight of the unit reflects the density of solid plantation-grown teak, making it stable and resistant to shifting during normal use. Maintenance requires only occasional wiping with a damp cloth to remove dust and debris, while teak cleaner and protector can be applied periodically to maintain the original wood coloration. The modular design allows the ARMLESS MIDDLE to be repositioned easily within a room layout, rearranged alongside matching corner or terminal units, or packed flat for storage and transport according to the 0.5300 CBM displacement specification.