Chest 4drws

The CHEST 4DRWS is a case good constructed entirely from solid mahogany, measuring 80.00 cm in width, 50.00 cm in depth, and standing at a total height of 150.00 cm. The structural volume occupies 0.6320 cubic meters, and the total weight of the assembled unit is 64.00 kg. This substantial weight reflects the dense grain structure of the mahogany timber used throughout the outer frame, internal partitions, and drawer components.

The vertical orientation of the cabinet establishes a tall, narrow footprint that optimizes floor space utilization in bedrooms, hallways, or dressing areas. Four horizontally oriented drawers are stacked vertically within the primary housing. Each drawer operates on integrated wooden side guides, allowing the storage boxes to slide outward smoothly along the internal tracks. The drawer fronts feature clean, flat surfaces without applied moldings, maintaining a uniform plane across the front elevation of the unit.

The top surface of the chest sits at 150.00 cm above the floor, providing a high horizontal platform bordered by a subtle, finished edge. The side panels are flat, solid mahogany boards joined to the top and bottom frames via traditional mortise and tenon joinery. The back panel consists of fitted timber slats secured to the rear rabbet joints to ensure structural squareness and rigidity.

The mahogany material exhibits a natural reddish-brown hue that deepens with age and exposure to light. The surface receives a protective clear coat finish that seals the open pores of the wood while retaining the visible grain patterns. This finish protects the timber against surface moisture and daily wear without altering the natural color of the mahogany substrate. The base of the unit rests directly on four integrated foot blocks that distribute the 64.00 kg mass evenly across the floor surface.

Each of the four drawers provides identical interior depth and width dimensions, accommodating folded garments, linens, or accessories. The drawer boxes are joined at the corners using interlocking dovetail joints, which resist lateral stress and pull forces applied during daily opening and closing actions. The bottom panels of the drawers are recessed into grooves along the interior perimeter of the drawer sides, preventing sagging when loaded with heavy items.

The exterior hardware consists of minimalist pulls mounted to the center of each drawer face, secured from the inside with threaded metal fasteners. The vertical alignment of the drawer stack creates narrow, consistent shadow lines between each drawer front, demonstrating precise manufacturing tolerances during assembly. The overall depth of 50.00 cm accommodates standard clothing storage requirements without protruding excessively into primary walkways or circulation zones within a room.

Maintenance of the CHEST 4DRWS involves routine dusting with a dry microfiber cloth to prevent particulate accumulation on the horizontal and vertical wooden surfaces. Periodic application of furniture wax specifically formulated for hard-wax or lacquer-finished mahogany preserves the moisture barrier of the protective coating. The solid wood construction allows for future refinishing or surface repair if the exterior sustains localized scratches or dents over years of use.