Table With 3 Drawers

The Table with 3 Drawers is constructed entirely from solid teak wood, utilizing the natural density and oil-rich grain characteristic of the material. Teak is selected for this furniture piece due to its high resistance to moisture, warping, and everyday wear, ensuring long-term structural stability. The exposed surfaces display a natural wood finish that highlights the linear grain patterns and warm honey-brown tones inherent to mature teak.

Measuring 120.00 cm in width, 80.00 cm in depth, and 75.00 cm in height, the table provides a rectangular work or display surface suitable for various functional layouts. The top panel has a thickness of 2.5 cm, supported by a sturdy four-leg frame joined securely to the underside apron. With a total volume of 1.0800 cubic meters and a weight of 42.00 kg, the physical mass of the table prevents shifting during daily use while remaining manageable for room placement.

The primary storage feature consists of three horizontal drawers integrated directly beneath the tabletop. Each drawer is built with traditional joinery techniques, featuring flush fronts that align precisely with the front apron when closed. The internal dimensions of the drawers accommodate standard stationery, documents, and small desk accessories. The drawer pulls are carved directly into the wood grain as recessed handles, maintaining a minimalist exterior profile without protruding metal hardware. The drawer boxes slide on wooden rails, operating smoothly within the designated compartments.

The four legs measure 7 cm by 7 cm in cross-section, tapering slightly toward the floor to distribute the 42 kg weight evenly. A clearance of 63 cm exists from the floor to the underside of the lowest drawer apron, providing adequate legroom for standard seating configurations. The joins between the legs and the tabletop frame utilize mortise and tenon construction, reinforced with internal dowels to resist lateral movement and load stress.

Maintenance requirements for this teak table are minimal due to the natural oils present in the wood. Routine cleaning involves wiping the surfaces with a dry or slightly damp cloth to remove dust and particulate matter. The hardware-free drawer design reduces mechanical failure points, as there are no metal tracks or hinges requiring lubrication or adjustment. The finished product ships fully assembled, with a total packed weight and volume corresponding to its specified CBM of 1.0800 m3. The combination of solid teak composition, precise dimensional proportions, and integrated three-drawer storage defines the physical and functional parameters of this furniture piece.