Restaurant Table Square

The Restaurant Table Square, model SFI, is a freestanding dining furniture piece designed for commercial and hospitality environments. Manufactured entirely from solid Mindi wood, this square table features visible natural wood grain patterns running consistently across the top surface. Mindi wood is known for its fine texture and dimensional stability, making it suitable for high-traffic dining rooms where surfaces undergo frequent cleaning and daily physical contact.

The overall dimensions of the table measure 80.00 cm in width, 80.00 cm in depth, and 75.00 cm in height. A square footprint of 80 by 80 centimeters accommodates two to four seating positions comfortably, fitting standard dining chairs with a standard seat height of 45 centimeters. The 75-centimeter height meets standard ergonomic guidelines for dining surfaces, allowing adequate clearance for legs and standard chair arms underneath the apron.

The structural weight of the unit is 23.00 kg. This mass provides stability against accidental bumping or shifting during service, while remaining light enough for staff to rearrange floor layouts when necessary. The packed volume occupies 0.4000 cubic meters (CBM), which dictates the baseline spatial requirement for freight calculations, warehousing, and flat-pack or assembled transit logistics.

The top panel consists of joined Mindi planks, finished to provide a smooth, flat plane for plates, glassware, and tableware. The edges of the table top are square-cut with a slight softening on the arris to prevent sharpness against wrists and forearms. Beneath the top, the apron and leg junctions utilize traditional woodworking joinery to secure the four legs firmly to the tabletop frame, preventing lateral wobble under load.

The four legs taper slightly from the upper frame down to the floor, distributing the 23-kilogram weight evenly across four distinct ground contact points. Each leg is positioned near the absolute corners of the square top, maximizing the clear interior space underneath for diners’ legs. Floor protectors or glides can be attached to the base of each leg to prevent scratching on hard flooring surfaces such as tile, concrete, or hardwood, and to reduce noise when the furniture is dragged across the floor.

The surface finish seals the porous Mindi wood grain against moisture absorption, food spills, and common cleaning agents used in restaurant operations. Routine maintenance requires only a damp cloth for cleaning and standard wood care products for long-term upkeep. The neutral warm brown tones of the Mindi material allow the table to integrate into various interior design schemes involving exposed brick, metal accents, or upholstered seating without relying on applied laminates or synthetic veneers.

Model SFI is delivered as a specified physical unit with concrete parameters: a width of 80 cm, a depth of 80 cm, a height of 75 cm, a weight of 23 kg, and a CBM of 0.4000. Its construction relies on solid Mindi timber throughout the primary load-bearing and surface components, ensuring repairability and structural continuity over years of commercial use.