Restaurant Table Round 100 Cm

The Restaurant Table Round 100 CM, designated under model code SFI, is a freestanding dining unit designed for commercial hospitality environments and high-traffic dining rooms. Manufactured entirely from solid mindi wood, this table utilizes a sustainable hardwood known for its distinct grain pattern, moderate weight, and resistance to warping under varying indoor climate conditions. The surface features a fine-textured natural finish that seals the wood pores while retaining the tactile warmth and visual characteristics of the raw botanical material.

The primary surface consists of a circular top measuring exactly 100 centimeters in diameter, providing a continuous horizontal plane with a thickness optimized for structural rigidity under daily commercial use. This circular geometry eliminates sharp corners, facilitating smooth pedestrian circulation in tight dining layouts and encouraging natural face-to-face conversation among seated guests. The perimeter of the tabletop is gently eased to prevent chipping and to offer a comfortable resting edge for diners.

With a total height of 75 centimeters, the table conforms to standard dining ergonomic requirements, pairing effectively with standard dining chairs that feature seat heights between 45 and 48 centimeters. The underside clearance allows adequate legroom for occupants, accommodating standard chair arms and ensuring proper posture during extended dining sessions. The depth of the unit matches the width at 100 centimeters, creating a symmetrical footprint that requires a minimum floor clearance radius to account for seating placement.

The structural support system relies on a central pedestal or integrated leg configuration connected securely to the underside of the top via reinforced joinery. This configuration maximizes floor space beneath the table, eliminating corner table legs that typically obstruct foot placement and limit chair positioning. The base is weighted and balanced specifically to support the 26-kilogram total mass of the unit, preventing tipping moments when weight is applied to the outer edges of the circular top.

Weighing 26 kilograms, the table is heavy enough to remain stable during normal use without requiring permanent floor anchoring, yet it permits repositioning by maintenance staff when clearing or reconfiguring floor plans. The disassembled or compact shipping volume occupies 0.62 cubic meters (CBM), a metric utilized for freight calculation and storage logistics. The mindi wood material density contributes directly to this weight profile, balancing portability with the necessary mass for commercial stability.

Maintenance of the SFI model involves routine dusting with a dry microfiber cloth and periodic cleaning with a damp cloth using neutral pH wood cleaners. The mindi wood surfaces can be retreated with standard furniture oils or waxes over extended periods of heavy use to maintain the moisture barrier and repair minor surface scuffs. The solid wood construction allows for future sanding and refinishing if deep scratches occur, extending the operational lifecycle of the furniture piece far beyond that of veneer or synthetic laminate alternatives.

The combination of the 100-centimeter span and the 75-centimeter height accommodates two to four seating positions comfortably, leaving sufficient central space for tableware, service dishes, and condiments. The natural grain variations inherent in mindi wood ensure that each table exhibits unique visual patterns, ranging from straight grain lines to subtle cathedral arches, depending on the specific timber section utilized during fabrication. The construction employs kiln-dried lumber to minimize internal moisture content, reducing the likelihood of joint separation or structural movement after installation in climate-controlled restaurant interiors.