Plaqu Chair

The Plaqu Chair is a dining and occasional seating unit constructed entirely from solid teak wood. Teak is selected for its high natural oil content, which provides inherent resistance to moisture, decay, and insect damage. The exposed grain pattern of the wood varies across each individual piece, displaying straight lines and occasional knots characteristic of mature timber. The surface finish is sanded smooth, retaining the natural golden-brown hue of untreated teak without heavy lacquers or opaque pigments.

Measuring 52.00 centimeters in width, 50.00 centimeters in depth, and 78.00 centimeters in overall height, the chair occupies a compact footprint suited for standard dining tables and desk configurations. The physical weight of the chair is 6.00 kilograms, making it manageable to lift, reposition, and stack or store when not in use. The volume displacement when packed for shipping is 0.1500 cubic meters, a metric derived from its structural proportions and fixed frame geometry.

The backrest consists of a curved wooden slat integrated directly into the rear vertical supports. This curve follows a wide radius designed to match the natural contour of the human spine when seated upright. The connection points between the backrest and the frame utilize traditional mortise and tenon joinery, secured with internal wooden dowels rather than visible metal fasteners.

The seat platform is set at a fixed height from the floor, constructed from solid teak planks joined side-by-side with tight tolerances to prevent warping caused by humidity shifts. The edges of the seat are rounded off to remove sharp 90-degree corners, reducing pressure points behind the knees of the occupant. The surface of the seat has a slight horizontal plane with no recessed cushioning, relying entirely on the rigidity of the wood construction for structural support.

Four vertical legs taper slightly from the underside of the seat down to the floor. The front legs are straight, while the rear legs angle outward at a minor degree to widen the base of support and increase overall stability. This outward angle prevents tipping when the user leans backward against the backrest. The bottom of each leg is cut flat to rest flush against indoor flooring surfaces, including hardwood, tile, and low-pile carpet. Horizontal stretcher bars connect the front and side legs below the seat level, forming an H-frame configuration that reinforces the structural joints against lateral movement and daily weight shifts.

The manufacturing process involves kiln-drying the teak raw material to a controlled moisture content before machining. This step minimizes future wood movement, splitting, and cracking under normal indoor climate conditions. Machine-cut components are hand-assembled and hand-sanded to ensure smooth transitions between the frame members. No synthetic veneers, particle board, or secondary softwoods are used in the primary load-bearing components of the chair.

Maintenance requirements for the Plaqu Chair involve occasional cleaning with a dry or damp microfiber cloth to remove dust accumulation from the grain crevices. Because the wood is finished without a thick polyurethane seal, periodic application of teak oil can be performed by the user to maintain the moisture resistance and deep color of the timber, though leaving the wood untreated will result in a gradual silver-gray patina caused by environmental exposure.

The physical dimensions allow multiple units to be pushed close to standard rectangular or round dining tables, fitting neatly beneath tabletops when clearance height permits. The 52-centimeter width provides adequate lateral space for various body types, while the 50-centimeter depth accommodates an upright seating posture suitable for dining, working, or meeting environments. The combination of solid teak joinery, specific volumetric weight, and straightforward geometric construction results in a durable seating fixture designed for continuous daily use in residential or commercial settings.