Nice Branch Chair Teak Fuul Back

The Nice Branch Chair Teak Full Back is a solid wood dining and occasional seating unit constructed entirely from plantation-grown teak. Measuring 47.00 cm in width, 53.00 cm in depth, and 86.00 cm in total height, this chair occupies a footprint suitable for standard dining tables, writing desks, and conference settings. The frame components are milled from mature teak timber, known for its high natural oil and rubber content, which protects the material against moisture absorption, warping, and insect damage. Each structural element is joined using traditional mortise and tenon joinery, secured with wooden dowels to ensure long-term stability under regular daily use without relying on metal fasteners that can loosen over time.

The front legs are straight, cylindrical turnings measuring approximately four centimeters in diameter at the seat rail junction, tapering slightly toward the floor to reduce visual weight while maintaining structural load capacity. The rear legs extend upward in a continuous vertical line to form the primary supports for the backrest assembly. These rear members feature a compound angle, raking backward at a three-degree tilt from the seat junction upward, which shifts the center of gravity and prevents tipping when the user leans back. The side stretchers connect the front and rear legs at a height of 22 cm from the floor, adding lateral rigidity and serving as a stable footrest.

The seat platform is constructed from solid teak planks, measuring 47 cm at its widest point near the front edge and tapering to 42 cm at the rear junction with the backrest. The upper surface of the seat features a shallow, ergonomic concave scoop, carved directly into the solid wood to a depth of 1.5 cm at its lowest point. This anatomical depression distributes sitting pressure evenly across the thighs and gluteal region, removing the need for upholstered cushions. The front edge of the seat is radiused with a 1-centimeter full bullnose profile to eliminate sharp 90-degree angles behind the knees, preventing restriction of blood circulation during extended periods of sitting.

The full backrest assembly defines the primary visual characteristic of the chair. Rising 42 cm above the seat surface, the backrest consists of a curved top rail and three vertical internal spindles that connect the top rail directly to the rear seat panel. The top rail is steam-bent from a single piece of teak stock, presenting a gentle horizontal arc with a 15-millimeter depth curve that follows the natural contour of the human spine. The three vertical spindles are evenly spaced across the 40-centimeter width of the back frame, each measuring 22 millimeters in thickness and shaped with an oval cross-section. This spindle configuration provides targeted lumbar and mid-back support while maintaining visual transparency through the chair profile.

In terms of physical logistics, the chair weighs 13.00 kg, a mass derived from the density of the solid teak wood utilized throughout the frame and seating components. This weight provides substantial stability, preventing the chair from shifting unexpectedly when seated, yet remains light enough for single-handed repositioning around a dining table. The packaged volume occupies 0.2142 cubic meters (CBM), reflecting its fully assembled delivery state. The surface finish is hand-sanded to a fine 320-grit smoothness, leaving the natural grain patterns of the teak exposed without the application of heavy synthetic varnishes or pigmented stains. The wood is treated solely with a clear, natural penetrating oil that highlights the golden-brown hues and tight grain lines characteristic of mature Tectona grandis. Maintenance requires only occasional wiping with a damp cloth and the periodic re-application of teak oil to preserve the original surface tone and prevent weathering if placed in semi-covered outdoor environments.