Folding Chair Linnea With Arm

The Folding Chair Linnea with Arm is constructed entirely from solid teak wood, a material traditionally selected for outdoor and high-use furniture due to its natural high oil content. This specific chemical composition gives the timber inherent resistance to moisture, decay, and insect damage without requiring synthetic sealants. The exposed grain features a straight to interlocked pattern with a golden-brown initial color that gradually transitions to a silvery-grey patina when exposed to ultraviolet light and weathering outdoors.

Measuring 55.00 centimeters in width, 54.00 centimeters in depth, and 88.00 centimeters in height, this chair offers a balanced seating profile designed for standard dining tables or casual resting areas. The inclusion of integrated armrests extends the overall width of the structure, providing continuous support points for the user’s forearms. These armrests are shaped with rounded edges to remove sharp corners, ensuring direct contact with the wood remains comfortable during extended periods of sitting.

Weighing 7.00 kilograms, the chair is heavy enough to remain stable on uneven outdoor surfaces while staying light enough for manual relocation by a single person. The physical footprint occupies a volume of 0.1100 cubic meters when fully assembled and opened. The folding mechanism relies on precision-engineered pivot points integrated directly into the teak frame, allowing the backrest and front legs to fold flush against the seat panel. This collapsing action reduces the thickness of the chair significantly, facilitating flat stacking and compact storage in narrow utility closets, sheds, or vehicle trunks during off-seasons.

The backrest consists of vertical teak slats spaced at regular intervals to promote air circulation against the user’s back, preventing heat accumulation in warm weather environments. The seat pan is constructed from parallel horizontal slats secured to the main aprons with concealed stainless steel fasteners, preventing rust bleeding into the surrounding timber grain. The joinery employs traditional mortise and tenon techniques combined with waterproof exterior adhesives, ensuring the structural joints withstand the expansion and contraction cycles caused by fluctuating humidity and temperature.

The legs feature straight profiles reinforced by lower stretcher rails on three sides, creating a rigid structural base that prevents lateral wobbling under weight loads. Floor contact points are finished smooth to prevent scratching indoor flooring materials, while the dense nature of the teak prevents splintering on abrasive outdoor patios, wooden decks, or lawn surfaces.

Maintenance requirements for the Linnea folding chair are minimal due to the properties of the raw teak wood. Users can clean the surface periodically using mild soap and water to remove accumulated dust and organic debris. If the original golden-brown hue is preferred over the weathered silver patina, a periodic application of teak oil or a specialized penetrating sealer can be applied after thorough cleaning. The hardware utilized throughout the assembly consists exclusively of corrosion-resistant metals, specifically selected to match the longevity of the solid wood components in damp or coastal environments.

The manufacturing process prioritizes structural integrity and dimensional stability, ensuring each component adheres strictly to the specified measurements of 55 cm width, 88 cm height, and 54 cm depth. The folding hinges operate smoothly without requiring specialized lubrication, relying on the natural lubricating oils of the teak wood at the pivot interfaces. The armrests are positioned at a height that allows the chair to slide partially underneath standard dining tables when folded in, reducing the spatial footprint in tight dining rooms or balconies.