Dining Table Suar

The Suar Dining Table is constructed from a single continuous slab of Indonesian Suar wood, scientifically known as Samanea saman, harvested from legally managed plantations. This tropical hardwood is recognized for its dense grain structure, interlocking wood fibers, and natural resistance to decay. The tabletop features a thickness of approximately 8 centimeters, providing substantial weight and structural rigidity. The perimeter of the table retains the organic, irregular contours of the tree’s outer edge, known as the live edge, which ensures that no two tables share the exact same silhouette. The surface is sanded progressively through multiple grit stages to achieve a smooth finish, then sealed with a matte, low-VOC polyurethane coating that protects the timber from moisture infiltration and daily wear while preserving the natural color variation of the heartwood and sapwood.

The dimensions of the table measure 240 centimeters in width, 80 centimeters in depth, and 75 centimeters in height. The 240-centimeter span accommodates three standard dining chairs along each of the two long sides, allowing for a total seating capacity of six to eight people depending on the width of the seating used. The 80-centimeter depth provides adequate surface area for table settings, serving dishes, and centerpieces without requiring guests across from one another to reach excessively. The 75-centimeter height conforms to standard ergonomic dining requirements, leaving sufficient knee clearance above the floor. With a total volume of 1.44 cubic meters, the substantial mass of the table requires adequate floor load consideration and clearance for entryways during installation.

The grain pattern of Suar wood is characterized by pronounced, contrasting rings and interlocked dark and light brown zones, often displaying a striking cross-fire or wavy figure that shifts in appearance under changing light angles. The top surface exhibits natural characteristics inherent to solid timber slabs, including occasional minor knots, hairline checks, and subtle undulations that reflect the natural growth history of the tree. The live edges are hand-barked and meticulously sanded to remove loose debris while maintaining the raw profile of the trunk.

The tabletop rests upon two heavy-duty trapezoidal powder-coated steel legs, positioned inset from the ends of the slab to maximize legroom for individuals seated at the heads of the table. The steel supports are fabricated from rectangular metal tubing with a wall thickness designed to bear the considerable weight of the solid wood slab, which exceeds one hundred kilograms. Pre-drilled threaded inserts are embedded directly into the underside of the wood slab, allowing the steel legs to be bolted securely in place using heavy-gauge machine screws. This mechanical fastening method permits the wood to expand and contract seasonally with changes in ambient humidity without placing stress on the joints, minimizing the risk of warping or cracking. Adjustable leveling feet are threaded into the base of each steel support, allowing the table to be stabilized on uneven floor surfaces.

Maintenance requires simple procedures limited to wiping the surface with a damp cloth and drying with a soft towel. The application of furniture wax or specialized wood oils is unnecessary due to the factory-applied protective seal, though periodic re-application of a clear matte sealant may be performed after several years of heavy use to maintain moisture resistance. Direct placement near high-heat sources, such as radiators or unshaded direct sunlight through large windows, should be avoided to prevent localized drying and thermal shock to the timber. The combination of the heavy Suar wood slab and the structural steel base results in a stationary, rigid dining surface suited for daily residential use as well as commercial hospitality environments where durability is a primary requirement.