Dining Chair With Arm Revivo

The Dining Chair with Arm Revivo is a fully assembled seating unit constructed primarily from solid mahogany wood. Mahogany forms the foundational frame, legs, and armrests, providing a dense and rigid structural skeleton capable of withstanding regular, heavy daily use in residential or commercial dining environments. The timber possesses a natural reddish-brown grain pattern that is visible across the entire exposed wooden surface, finished with a protective clear coating that seals the pores against moisture absorption and superficial scratches.

Measured physically, this dining chair has a total width of 59.00 cm from the outermost edge of one armrest to the other. The overall height reaches 99.00 cm from the floor to the topmost point of the backrest, positioning the top rail at a standard height relative to typical dining tables. The depth of the unit measures 53.00 cm, calculated from the front edge of the seat cushion to the furthest point of the rear back legs. In terms of shipping and spatial planning metrics, a single unit occupies a volume of 0.3000 cubic meters (CBM).

The seating configuration incorporates integrated armrests that flow continuously from the upper backrest supports down to the seat frame. These arms are positioned at a height designed to support the user’s forearms while seated at a table. The backrest is constructed with vertical wooden slats or a solid wooden panel layout, depending on the exact production batch, secured via traditional mortise and tenon joinery methods to ensure frame stability without relying solely on metal fasteners. Four straight, tapered mahogany legs descend from the seat base, angled slightly outward to distribute weight evenly and prevent tipping.

The seat base consists of a padded cushion upholstered in a durable textile fabric, attached over a solid wood or plywood sub-base with internal webbing or high-density foam padding. This padding maintains its profile under repeated compression. The junction points where the legs meet the seat frame are reinforced with internal corner blocks, reducing lateral sway during movement.

Maintenance of the mahogany frame requires only periodic wiping with a dry or slightly damp cloth to remove dust accumulation, avoiding harsh chemical solvents that could degrade the surface finish. The upholstered seat component can be cleaned using standard fabric care methods appropriate for the specific textile used in the covering. The chair’s physical footprint of 59 cm by 53 cm requires adequate clearance around dining tables to allow users to pull the chair outward and push it inward without colliding with adjacent furniture pieces. The 0.3000 CBM measurement serves as the baseline dimension for calculating freight logistics, container loading capacities, and warehouse storage allocations.