Chair Holland Sungkai With Slat

The CHAIR HOLLAND SUNGKAI WITH SLAT is a dining and accent seating unit constructed entirely from solid Sungkai wood. With a total width of 55.00 centimeters, a depth of 52.00 centimeters, and a height of 79.00 centimeters, the chair provides a compact seating footprint suitable for standard dining tables, office desks, and multi-purpose interior spaces. The physical frame weighs 6.00 kilograms, making the furniture item manageable to move across different floor surfaces during daily layout adjustments or cleaning routines. When packaged for transport, the single unit occupies a volume of 0.2200 cubic meters.

Sungkai wood serves as the primary material for both the structural framework and the visible surfaces of the chair. Known scientifically as Peronema canescens, Sungkai is a hardwood native to Southeast Asia, specifically Indonesia, favored in furniture manufacturing for its light coloration, straight grain patterns, and moderate density. The natural finish of the wood displays a pale yellowish-white hue with distinct grain lines, preserving the organic texture of the raw timber. Protective coatings applied to the exterior wood surfaces seal the pores against moisture absorption and everyday abrasion, while maintaining the tactile qualities of the natural material.

The backrest features a distinctive slat construction method. Multiple vertical wooden slats, machined to uniform thicknesses and gently curved, are secured horizontally between the top rail and the seat frame. This slatted configuration distributes pressure across the back when seated, while allowing airflow through the backrest aperture. The curvature of the individual slats aligns with the natural contours of the human spine, providing structural support without requiring additional upholstery or foam padding. The top rail of the backrest is rounded along its upper edge to prevent sharp pressure points against the user’s back.

The seat panel measures 55.00 centimeters in width and 52.00 centimeters in depth, offering a broad horizontal surface for sitting. The edges of the seat are softly radiused to reduce friction against the back of the user’s knees. Four cylindrical wooden legs extend downward from the seat corners, secured using mortise and tenon joinery techniques that lock the components into rigid configurations without relying solely on metal fasteners. The front legs stand vertically, while the rear legs angle slightly outward to increase the overall stability footprint and prevent tipping during shifting movements. Wooden stretchers connect the lower sections of the legs on the sides and the front-to-back axis, bracing the frame against lateral loads and torsional stress.

The total height of 79.00 centimeters places the top of the backrest comfortably below standard table heights, allowing the chair to slide underneath most dining tables when not in use, thereby clearing floor space in compact rooms. The seat height corresponds to standard ergonomic measurements, accommodating adults of varying statures. The 6.00-kilogram weight distribution is concentrated heavily toward the lower half of the chair, keeping the center of gravity low and stable.

Maintenance requirements for the CHAIR HOLLAND SUNGKAI WITH SLAT involve standard hardwood care procedures. Dust accumulation can be removed using a dry microfiber cloth, while liquid spills require immediate wiping with a damp cloth followed by thorough drying. The solid Sungkai construction allows for periodic re-finishing or sanding if surface scratches occur over extended periods of use. The absence of fabric upholstery, springs, or complex mechanical parts eliminates common points of wear and tear, ensuring long-term structural integrity in domestic and commercial interior environments. The product is shipped as a fully assembled unit, bypassing the need for manual assembly tools or hardware installation.