Mini Bar Mn.01

The MINI BAR MN.01, designated under the Panama model, is a heavy-duty freestanding hospitality unit constructed entirely from solid mahogany. Measuring 150.00 cm in width, 90.00 cm in height, and 60.00 cm in depth, this furniture piece occupies a spatial volume of 0.8380 cubic meters. With a total weight of 109.00 kg, the substantial mass reflects the dense composition of the mahogany timber and the reinforced interior framework utilized throughout its assembly.

Mahogany serves as the primary structural and visual material for the exterior casing, side panels, and interior components. This tropical hardwood exhibits a straight to interlocked grain pattern with a reddish-brown natural coloration that darkens over time with exposure to light. The timber is kiln-dried prior to milling to reduce moisture content, mitigating potential warping, splitting, or dimensional movement caused by fluctuations in ambient humidity. The external surfaces are sanded through multiple progressive grits to achieve a smooth tactile finish before receiving a protective clear coat sealer that highlights the wood’s natural pore structure without altering its organic hue.

The physical dimensions of 150 cm width by 60 cm depth provide a horizontal working surface suitable for beverage preparation, glassware placement, and the accommodation of bar accessories. The 90 cm height aligns with standard counter ergonomics, allowing users to stand comfortably while accessing stored items. The top surface consists of solid mahogany planks joined edge-to-edge with dowels and waterproof adhesive, creating a continuous, flat plane capable of supporting heavy loads of glassware, bottles, and blending equipment without structural deflection.

Access to the interior storage compartments is integrated into the front elevation of the cabinet. The internal layout features dedicated zones designed to hold standard-sized wine bottles, liquor spirits, bar tools, and serviceware. Vertical dividers and horizontal shelving within the cabinet are fixed into dado joints cut directly into the interior walls, ensuring structural stability under heavy weight loads. The clearance heights between internal shelves accommodate taller liquor bottles and specialized glassware without requiring horizontal stacking.

The rear panel of the MINI BAR MN.01 is constructed from matching mahogany plywood, secured with screws and wood glue into a rabbeted frame to maintain square alignment of the entire cabinet body. The base of the unit features a solid plinth foundation that distributes the 109 kg weight evenly across the flooring surface, preventing concentrated pressure points on wooden or tiled floors. The base trim is mitered at the corners and sealed against moisture ingress from floor cleaning.

Hardware components, including hinges and drawer slides where applicable, are fabricated from corrosion-resistant metal alloys with a brushed finish. The hinges are recessed into mortises cut into the cabinet doors and side panels, permitting a full range of motion for the doors while maintaining tight, consistent gaps along the perimeter when closed. Fasteners are countersunk and plugged with matching wood grain dowels where visible, maintaining a uniform appearance across all exposed exterior surfaces.

Shipping and delivery logistics require careful handling due to the 109 kg net weight and the 0.8380 CBM volume. The unit ships fully assembled in a crated wooden package lined with protective foam sheeting to safeguard the mahogany finish against transit abrasion and impact. Installation requires a minimum of two individuals to position the unit correctly given its mass, and placement should occur on a level surface to ensure proper door alignment and structural load distribution. Maintenance involves routine dusting with a dry microfiber cloth and periodic application of furniture wax or oil formulated specifically for solid hardwood surfaces to preserve the moisture barrier of the mahogany timber.