High Barstool Wooden Frame Top With Semi Chrome Black Leather

The High Barstool Wooden Frame Top with Semi Chrome Black Leather measures 37.00 cm in width, 33.00 cm in depth, and stands at a height of 76.00 cm. With a total volume of 0.0900 cubic meters and a weight of 6.00 kg, this stool is scaled specifically for standard counter and bar heights while maintaining a compact footprint that allows multiple units to fit along a narrow breakfast bar or commercial counter ledge.

The primary structural element of the top frame consists of solid teak wood. Teak is dense, hard-grained, and naturally rich in natural oils, which protects the material against moisture absorption, warping, and cracking over extended periods of daily use. The wood surfaces are milled to smooth finishes, highlighting the natural grain patterns and variations inherent to organic timber. The joinery connecting the upper wooden components relies on traditional mortise and tenon techniques, ensuring rigid load-bearing capacity without excessive reliance on visible metal brackets.

Atop the wooden base rests a cushioned seat upholstered in semi-chrome black leather. The leather undergoes a semi-chrome tanning process, combining mineral salts with vegetable agents to achieve a balance between the supple feel of chrome-tanned hides and the structural firmness associated with traditional vegetable tanning. This finish provides a matte black surface that resists scuffing and is straightforward to wipe clean with a damp cloth. The interior cushioning utilizes high-density polyurethane foam, preventing the seat from bottoming out under weight and allowing the foam to return to its original loft after use.

The frame geometry combines the warmth of the teak wood top structure with structural supports designed to handle lateral stress. Four vertical legs taper slightly from the seat down toward the floor, a configuration that lowers the center of gravity and increases stability. Integrated footrests are positioned at uniform heights across all four sides of the lower frame, providing a stable platform for users to rest their feet when seated. These stretchers also lock the legs into a rigid assembly, preventing the frame from racking or wobbling sideways when weight is applied unevenly.

Weighing 6.00 kg, the stool is heavy enough to remain stable during normal sitting and standing movements, yet light enough to be picked up and repositioned by hand. The physical dimensions—37 cm wide by 33 cm deep—are intentionally restrained to prevent the stools from crowding the floor space around a kitchen island, cafe table, or high-top bar. The 76 cm height places the seated user at the correct ergonomic level relative to surfaces standing between 100 cm and 110 cm from the floor.

Maintenance requirements for this model are straightforward due to the material selection. The teak wood requires occasional treatment with natural oils if kept in dry environments to prevent the wood fibers from drying out, while the semi-chrome leather requires only mild soap and water for routine spot cleaning. The combination of solid teak, durable leather upholstery, and a balanced weight-to-dimension ratio results in a functional piece of seating hardware built for rigorous daily operation in both domestic kitchens and high-traffic hospitality venues.