Shower Bench Cantik

The SHOWER BENCH CANTIK is a freestanding bathroom seating unit measuring 53.00 cm in width, 46.00 cm in height, and 35.00 cm in depth. Designed primarily for wet environments such as shower stalls and walk-in bathrooms, this bench has a total volume displacement of 0.0870 cubic meters when packaged or configured for freight. The physical footprint occupies slightly more than half a meter horizontally while maintaining a standard seating height of 46 centimeters, which aligns with typical chair and stool dimensions for ergonomic sitting posture.

Solid teak wood constitutes the entirety of the material composition for the SHOWER BENCH CANTIK. Teak is a dense, hard wood species native to tropical regions, historically selected for marine and outdoor applications due to its high natural oil and rubber content. These inherent botanical oils act as a moisture barrier, preventing water absorption, warping, cracking, and rot when exposed to frequent saturation and high humidity typical of bathroom environments. The grain structure of the teak used in this bench is straight to wavy, presenting a golden-brown hue that deepens with age and exposure to light and water.

The construction methodology relies on joinery techniques suited for load-bearing wooden furniture exposed to fluctuating temperatures and moisture levels. The seat top consists of parallel teak slats spaced evenly apart. This slatted configuration serves a distinct mechanical and functional purpose: it prevents water pooling on the seating surface during use and facilitates rapid drainage and airflow, allowing the wood to dry thoroughly between uses. Each slat is secured to the underlying structural frame using corrosion-resistant hardware, preventing rust bleeding into the wood fibers over extended periods of water exposure.

Four vertical legs support the upper seat platform, connected by horizontal stabilizing stretchers running along the lower perimeter. These stretchers increase the lateral stability of the bench, distributing weight evenly across the footprint and preventing the legs from bowing outward under heavy loads. The legs terminate in flat, level surfaces designed to make full contact with tiled or stone shower floors, minimizing wobble on uneven grout lines. The edges and corners of the seat and legs undergo manual sanding to create a smooth, rounded profile, removing sharp 90-degree angles to prevent skin scraping and snagging of towels or clothing in confined spaces.

Maintenance requirements for the SHOWER BENCH CANTIK derive directly from its solid teak construction. Unlike manufactured wood or veneered products, solid teak does not peel or delaminate when wet. Routine cleaning requires only mild soap and water to remove soap scum and mineral deposits left by hard water. Left untreated in a shower environment, the teak will gradually weather to a silvery-gray patina through oxidation, while retaining its structural integrity. Applying a teak sealer or natural oil periodically will maintain the original warm brown color tones if preferred by the user.

Transport and placement logistics are defined by the physical measurements. Weighing within a manageable range typical of solid hardwood furniture of this scale, the bench can be moved easily by a single person into position inside a shower, sauna, or dressing area. The depth of 35.00 cm ensures it fits comfortably into standard shower stalls without obstructing movement or blocking drainage grates, while the 53.00 cm width provides adequate seating surface for a single adult. The packaged volume of 0.0870 CBM reflects its compact, non-foldable, pre-assembled or flat-pack shipping dimensions, depending on the specific distribution method utilized by the manufacturer.