Pintu 38 X 198

The PINTU 38 X 198 is a solid wood architectural component designed for interior partition and room access applications. Measuring 38.00 centimeters in width, 198.00 centimeters in height, and 3.00 centimeters in depth, this rectangular panel occupies a total volume of 0.0200 cubic meters. The physical footprint of the unit makes it suitable for narrow doorways, small utility spaces, pantry closets, or specialized cabinetry enclosures where standard-width doors exceed spatial constraints.

Constructed entirely from natural wood, the door slab presents the inherent grain patterns, density, and tonal variations characteristic of timber material. The 3.00-centimeter thickness provides structural rigidity sufficient for standard interior use while maintaining a relatively lightweight profile that minimizes load stress on hinges and door frames. The vertical rectangular orientation measuring 198 centimeters tall aligns with standard ceiling heights and door frame clearances typically found in residential and commercial architecture, though the 38-centimeter width deviates significantly from standard pedestrian door dimensions, identifying this specific model as a narrow-format or half-width panel.

The surface of the wood can be finished, painted, stained, or sealed according to project specifications, allowing the material to integrate visually with existing interior palettes or architectural schemes. Natural wood construction permits on-site planing or trimming within standard tolerances if minor dimensional adjustments are required during installation, though substantial alterations may compromise the structural integrity of the core material. The edges of the door are cut square, providing clean lines for butt hinges, pivot hardware, or sliding track mechanisms.

Installation requires standard carpentry tools and hardware sized appropriately for a 3-centimeter thick wooden door. Because of the narrower 38-centimeter width, weight distribution differs from conventional doors, requiring precise alignment of hinges to prevent sagging over extended periods of use. The unit can be configured to swing left or right depending on the placement of hardware and the operational clearance of the surrounding room. The flat surfaces accommodate standard mortise locks, tubular latches, surface bolts, or decorative pulls.

The cubic meter measurement of 0.0200 m3 per unit simplifies logistical planning, freight calculation, and warehousing storage requirements. Multiple units stack efficiently due to the uniform depth and rectangular geometry. Maintenance involves standard wood care practices, including periodic dusting, avoidance of excessive moisture exposure, and re-application of protective sealants or finishes as environmental conditions dictate. The solid wood composition allows minor surface scratches or dents to be sanded and refinished locally without requiring total replacement of the architectural element.