Bathroom Cabinet Pramjit

The BATHROOM CABINET PRAMJIT, designated under the model name Pram, is an expansive storage fixture designed for large architectural washrooms and master bathroom suites. Measuring 400.00 cm in width, 190.00 cm in height, and 60.00 cm in depth, this unit provides a substantial footprint intended for permanent wall placement. Weighing 250.00 kg, the cabinetry requires reinforced structural support during installation to safely bear its own mass alongside the weight of stored toiletries, linens, and plumbing integrations.

Constructed entirely from solid mahogany, the cabinet utilizes a dense tropical hardwood known for its dimensional stability and natural resistance to moisture-induced warping. The reddish-brown grain of the mahogany is finished with a protective sealant that shields the wood fibers from direct water contact and high humidity typically present in bathroom environments. This dense material composition accounts for the significant weight of the cabinet, ensuring structural rigidity across its four-meter horizontal span without sagging under vertical loads.

The physical architecture of the Pram model divides the 400.00 cm width into a symmetrical configuration of storage compartments. The central and side sections incorporate a combination of solid wood panel doors and open shelving bays, allowing for both concealed and accessible storage arrangements. The vertical span of 190.00 cm reaches from standard floor levels toward the upper ceiling line of the room, utilizing vertical wall space to maximize internal volume. The 60.00 cm depth accommodates deep basin integrations, extensive countertop space for daily utilities, and internal shelving capable of holding bulky items such as folded bath sheets and storage baskets.

The hardware integrated into the cabinet consists of corrosion-resistant metal hinges, drawer slides, and pulls designed to withstand moist air without oxidizing. The doors operate on concealed multi-pivot hinges that allow for precise alignment adjustments during and after installation. Drawers utilize full-extension metal slides, providing complete access to the interior depth of the storage spaces. The base of the cabinet rests solidly against the floor, distributing the 250.00 kg weight evenly across the lower frame to prevent localized pressure points on bathroom flooring materials.

Plumbing routing is accommodated through designated cutouts within the base and internal framing of the cabinet, allowing standard water supply and drainage pipes to connect to vessel or drop-in sinks positioned on the top surface. The mahogany surfaces are joined using traditional woodworking joinery reinforced with modern fasteners, ensuring that the frame remains rigid through seasonal changes in ambient temperature and humidity. The exterior finish maintains a consistent matte sheen that highlights the natural pores and grain patterns of the mahogany timber without relying on high-gloss synthetic coatings.