Toilet Devider

The TOILET DEVIDER is a solid wood bathroom component manufactured entirely from mindi wood, known botanically as Melia azedarach. This specific timber is selected for its distinct grain pattern, which ranges from straight to slightly interlocked, providing a natural texture that is visually apparent across the visible surfaces of the divider. Mindi wood possesses a moderate density and a medium-fine texture, making it stable for indoor utility where humidity levels fluctuate moderately. The wood is finished to seal the pores while maintaining the natural tone and tactile qualities of the raw material, resulting in a matte surface that resists moisture accumulation typical of washroom environments.

Measuring 95.00 centimeters in width, this divider spans a standard clearance distance suitable for compartmentalizing residential or commercial washroom layouts. The depth of the unit measures 54.00 centimeters, providing a substantial projection from the mounting wall to ensure adequate physical separation between adjacent fixtures. The height of the profile is constrained to 7.00 centimeters, establishing a low-profile architectural element rather than a full-height privacy wall. This specific height dimension dictates its function as a spatial divider or partition anchor, separating specific zones at a lower visual plane without obstructing overall room illumination or ventilation systems.

Weighing 13.00 kilograms, the unit requires secure structural anchoring to support its mass cantilevered from a vertical surface. The total volume occupied by the packed product is calculated at 0.0300 cubic meters (CBM), a metric relevant for freight calculation, warehouse stacking, and logistics planning. The physical mass is derived entirely from the density of the solid mindi timber used throughout its core and exterior surfaces, avoiding lightweight composite materials or hollow interior framing. This solid-stock construction allows the unit to withstand physical contact and minor impacts common in high-traffic sanitary facilities without suffering structural deformation.

The construction method relies on joined solid mindi planks, edge-glued to form a continuous panel that maintains dimensional stability across the 95.00-centimeter width. The edges are precision-milled with a slight radius to eliminate sharp corners, reducing the risk of injury or snagging in confined spaces. The mounting interface incorporates concealed fastening channels or pre-bored anchor points designed to accept standard heavy-duty hardware, ensuring that the hardware remains hidden from sight once installed against a tiled or paneled wall surface. The grain orientation runs horizontally along the 95.00-centimeter span, reinforcing the linear geometry of the component and aligning with standard architectural sightlines in bathroom installations.

Maintenance of the TOILET DEVIDER involves standard wood care protocols suited for humid environments. The factory-applied protective coat repels water droplets and prevents prolonged moisture absorption into the mindi wood pores. Routine cleaning requires only a damp cloth with mild, non-abrasive detergent to remove surface dust and residue. Harsh chemical solvents or abrasive scouring pads are incompatible with the surface finish, as they degrade the protective sealant and expose the raw timber underneath. Periodic inspection of the wall mounting hardware is recommended to maintain structural rigidity, as the 13.00-kilogram weight exerts constant downward leverage on the anchor points. The combination of solid mindi wood material properties, precise dimensional parameters, and durable surface sealing yields a functional architectural divider built for long-term interior utility.