Tas Karung Goni 03 – 180/6

The TAS KARUNG GONI 03 – 180/6 is a structured handheld carrier constructed entirely from natural jute fiber, commonly known as goni. Jute material forms the primary body of the bag, presenting a coarse, visible weave with a characteristic fibrous texture and a neutral, earthy tan coloration. The textile retains the organic irregularities typical of processed plant fibers, resulting in a tactile surface with varied thread thicknesses across the entire exterior.

This model measures 37.00 centimeters in width and 31.00 centimeters in depth, providing a horizontal rectangular footprint designed to accommodate flat items, documents, or daily carry essentials. The height specification of 1.00 centimeter describes the flat profile of the structural base and side gussets when the bag is empty and collapsed. Upon expansion, the interior compartment opens to hold volumetric objects within the defined 37 by 31 centimeter boundaries. The complete unit weighs 0.20 kilograms, establishing a lightweight structural foundation that adds minimal mass to the items placed inside. The volumetric calculation for shipping and storage accounts for 0.1900 cubic meters per unit parameters.

Construction details center on the stitching and edge finishing of the thick jute material. The seams are bound with reinforced threading to prevent the coarse fibers from fraying along the load-bearing edges. The top opening features a straight-cut hem, exposing the woven grain while securing the perimeter against unraveling. Dual carrying handles are attached to the upper body panels via reinforced box-stitch patterns, distributing tension evenly across the upper portion of the bag when lifted. The handles consist of woven fabric strips securely fastened to both the front and rear exterior faces.

The interior compartment consists of a single unlined cavity composed of the reverse side of the jute material. The absence of internal synthetic linings preserves the raw, breathable nature of the natural fiber construction. The rigid properties of the goni material allow the bag to maintain a self-supporting vertical stance when placed on a flat surface, preventing the sides from slumping inward completely.

Maintenance of this jute bag requires specific handling due to the organic nature of the material. Water saturation can weaken the structural integrity of the natural fibers and cause shrinkage or odor retention if not dried thoroughly. Cleaning is restricted to dry brushing or spot treatment with a damp cloth and mild detergent, avoiding complete submersion in water. The material reacts to prolonged direct sunlight with gradual fading of the natural tan hue.

The design layout excludes exterior pockets, zippers, flaps, or metallic hardware, resulting in a minimalist silhouette focused entirely on the utility of the open-top format. The flat base panel prevents sagging when moderate loads are distributed evenly across the bottom surface. The product ships in a flat orientation, aligning with the 1.00 centimeter height metric, allowing multiple units to stack efficiently for storage or transport logistics prior to use.