Barley Velvet K/d

The Barley Velvet K/D is a dining chair constructed from solid teak wood paired with a velvet-upholstered seat and backrest. Standing at a total height of 123.00 cm, the chair features a tall back profile designed to support the upper back and shoulders. The physical footprint measures 51.00 cm in width and 45.00 cm in depth, creating a stable base that balances the vertical height of the frame. The entire unit occupies a volume of 0.3000 cubic meters when packaged or assembled and weighs a total of 8.00 kg, making it manageable to move across different flooring surfaces during room reconfigurations or cleaning routines.

The structural frame utilizes teak, a dense tropical hardwood known for its natural oil content and tight grain structure. Teak resists moisture absorption and dimensional warping, which maintains the structural integrity of the joints over years of regular use. The exposed wood surfaces display the natural grain patterns and warm honey-brown tones inherent to the species, finished with a clear protective coat that seals the pores without obscuring the organic texture. The joinery employs traditional woodworking techniques, securing the legs and seat rails together to handle lateral loads and daily sitting friction without loosening.

The upholstery consists of a short-pile velvet fabric stretched tightly over high-density foam padding on both the seat cushion and the front face of the backrest. Velvet provides a tactile, textured surface that absorbs light differently depending on the viewing angle, creating subtle tonal variations across the fabric. The cushioning material beneath the velvet is polyurethane foam chosen for its resistance to compression fatigue, ensuring the seat retains its profile and firmness after repeated weight application. Piping runs along the perimeter of the upholstery seams, locking the fabric edges in place and reinforcing the stitching against fraying from friction.

The backrest measures a significant portion of the total 123.00 cm height, tapering slightly from the lower lumbar region toward the top crown. This elongated geometry positions the back support higher up the spine compared to standard dining chairs. The four legs taper downward from the seat frame to the floor, terminating in flat contact points that distribute the 8.00 kg weight evenly. Bracing stretchers connect the lower sections of the legs on the sides and back, adding rigidity to the undercarriage and preventing the legs from bowing outward under heavy loads.

The K/D designation indicates a knock-down construction format, meaning the chair is manufactured in discrete components that require assembly via mechanical fasteners. Metal threaded inserts embedded directly into the teak frame receive heavy-duty steel bolts during assembly, allowing the unit to be disassembled for flat-pack transport or storage and reassembled without degrading the holding power of the joints. The hardware required for this process is included with the unit, alongside pre-drilled alignment holes that ensure precise geometry when tightening the components together.

Maintenance requirements for the Barley Velvet K/D depend on the two primary materials involved. The teak frame requires periodic dusting with a dry microfiber cloth and can be treated with natural wood oils if the surface begins to dry out from prolonged exposure to direct sunlight or low humidity environments. The velvet upholstery should be vacuumed regularly using a soft brush attachment to remove dust particles settled between the pile fibers. Spills on the velvet must be blotted immediately with an absorbent cloth rather than rubbed, to prevent the liquid from penetrating the foam core and to avoid flattening the nap of the fabric. The structural bolts securing the knock-down frame should be checked and tightened annually to compensate for normal settlement resulting from everyday use.