90 Cm Rococo 75 Cm High 4 Drawers

The 90 CM ROCOCO 75 CM HIGH 4 DRAWERS is a solid mahogany case piece designed with traditional European curves and proportions. Measuring 90.00 cm in width, 75.00 cm in height, and 50.00 cm in depth, this furniture unit occupies a CBM volume of 0.3300 m3. The entire physical structure relies on genuine mahogany timber, selected for its dense grain structure, weight, and capacity to hold intricate hand-carved details without splintering.

The front facade features a bank of four horizontally oriented drawers stacked vertically. Each drawer operates on traditional wooden side-hung runners, a construction method that eliminates metal mechanical parts and relies on precise carpentry fit. The drawer boxes are joined using traditional dovetail joinery at the corners, visible upon pulling out any of the compartments. This specific joint type resists the outward pull forces exerted during daily use, ensuring the drawer fronts remain securely attached to the side panels over decades of operation.

The exterior silhouette incorporates distinct Rococo design characteristics, most notably the undulating serpentine curves along the drawer fronts and the curved perimeter of the top surface. The top board measures 90 cm across and 50 cm front-to-back, presenting a flat wooden plane finished to a smooth tactile grade that reveals the underlying linear grain patterns of the mahogany. The edges of this top board are shaped with a subtle ogee profile, curving downward and inward before meeting the vertical casework.

The vertical sides of the cabinet curve outward slightly before tapering downward toward the floor, following the classic cabriole-inspired leg geometry integrated directly into the lower frame. The four legs curve outward at the knee and sweep inward toward the foot, terminating in scrolled or pad details characteristic of mid-18th-century furniture typologies. This continuous leg-and-frame construction distributes the overall weight of the unit and the contents of the four drawers directly to the floor across four distinct ground contact points.

Drawer faces are adorned with carved molding details that follow the serpentine contour of the wood, creating shallow recessed panels on each of the four tiers. Metal hardware consisting of cast brass pulls is centrally mounted on each drawer face, secured via threaded rear posts. The brass hardware shows a subdued metallic finish that contrasts with the dark reddish-brown tones characteristic of seasoned mahogany timber.

The physical depth of 50 cm allows each of the four drawers to accommodate folded garments, documents, linens, or household accessories. The internal dimensions of the drawers utilize the majority of the 90 cm exterior width, constrained only by the thickness of the interior partition walls and the side panels. The back panel of the unit consists of flush-fitted tongue-and-groove mahogany boards, making the piece structurally rigid against lateral racking forces.

Finishing procedures applied to the mahogany involve hand-applied stains and sealers that penetrate the porous surface of the timber, followed by clear topcoats to protect against moisture absorption and surface abrasion. The resulting finish maintains a semi-gloss sheen that reflects light across the curved surfaces of the drawers and the cabriole framework, highlighting the natural growth rings and varied density of the mahogany material.

With a total volumetric footprint of 0.3300 m3, the cabinet fits against standard interior walls, requiring a floor space 90 cm wide by 50 cm deep. The height dimension of 75 cm places the top surface at a standard table height, allowing the upper plane to function as a display surface for lamps, books, or decorative objects while keeping the uppermost drawer within comfortable reach for standing users. The lowest drawer sits close to the floor line, supported by the sweeping structural rails connecting the front and rear legs.

Construction tolerances are maintained throughout assembly to ensure drawer alignment is consistent within the frame openings. Gaps between adjacent drawer fronts remain uniform across the entire front elevation. The solid mahogany boards used for the top, sides, dividers, and drawer fronts are conditioned to minimize wood movement caused by seasonal fluctuations in ambient humidity. Maintenance of the exterior surfaces requires only dry or slightly damp cloth wiping, avoiding chemical solvents that could degrade the protective topcoat sealing the mahogany grain.