Bed Poster Cm.01b

The BED POSTER CM.01B, designed under the Panama model, is a freestanding architectural furniture piece built entirely from solid mahogany. Measuring 179.00 centimeters in width, 217.00 centimeters in depth, and standing at a total height of 210.00 centimeters, this four-poster bed occupies a substantial footprint suited for large bedrooms. The vertical corner posts anchor the structure, rising from the floor to the maximum height specification to define the upper canopy perimeter.

Mahogany forms the structural core of the frame, selected for its dense grain structure and weight-bearing capacity. The visible surfaces display the natural reddish-brown coloration inherent to the wood species, finished with a protective clear coat that seals the pores against moisture while exposing the underlying growth rings. The headboard sits flush between the rear structural posts, constructed with vertical wooden slats joined by mortise and tenon techniques. The footboard mirrors the height and thickness of the side rails, creating a uniform perimeter wall around the mattress platform.

The four primary posts measure approximately ten centimeters square at the base, tapering slightly toward the top joint where they connect to the overhead horizontal rails. These top rails form an open rectangular frame, secured by internal metal brackets hidden from view to maintain the clean lines of the joinery. The side rails attach to the headboard and footboard using heavy-duty steel bed bolts, ensuring rigidity and preventing lateral movement or squeaking during use. The mattress sits upon a series of transverse wooden slats resting on interior ledges screwed directly into the side rails.

Weighing over one hundred kilograms fully assembled, the CM.01B requires two people for assembly and positioning within a room. The clearance from the floor to the underside of the side rails measures thirty centimeters, providing open space beneath the bed frame for air circulation or low-profile storage bins. The headboard height reaches one hundred twenty centimeters from the floor, offering a solid vertical backrest for sitting upright.

Maintenance of the mahogany frame involves dusting with a dry microfiber cloth and occasional application of furniture wax to preserve the sheen of the protective finish. The wood components are kiln-dried to a moisture content below ten percent prior to manufacturing, reducing the risk of warping or cracking under normal indoor humidity fluctuations. The overall geometry follows strict ninety-degree angles at all corners, ensuring the frame remains square during daily use. Hardware supplied with the bed includes threaded steel inserts embedded directly into the mahogany components, paired with machine bolts for repeated disassembly and reassembly without stripping the wood grain.