4 Poster Bed 70brass

The 4 POSTER BED 70BRASS measures 210.00 cm in height, 210.00 cm in width, and 160.00 cm in depth, forming a substantial rectangular footprint designed to accommodate standard mattress sizes while establishing a strong vertical presence within a bedroom layout.

The primary structural material is mindi wood, selected for its distinct grain pattern, moderate density, and stability. Mindi wood is known for taking stains and finishes evenly, allowing the natural figuring of the timber to remain visible across the headboard, footboard, and four vertical posts. The frame relies on mortise and tenon joinery techniques at primary stress points, ensuring rigid connections between the side rails, posts, and headboard assembly. This construction method minimizes lateral movement and squeaking during regular use.

Four upright timber posts define the corners of the furniture piece, extending from the floor to the upper structural canopy members at the 210.00 cm height mark. These posts feature straight, square-cut profiles without excessive ornamentation, maintaining a clean architectural silhouette. The headboard consists of solid mindi panels integrated directly between the rear posts, providing a vertical backrest surface when sitting up in bed.

The "70 Brass" model designation incorporates specific metallic hardware elements integrated into the wooden frame. Solid brass fittings, brackets, or accent components are secured at key joint intersections and structural transition points. The brass components contrast visually against the warm, organic tones of the mindi wood surface, providing visible mechanical fastening points that double as decorative accents. The metallic finish resists tarnishing through the application of a protective clear coat over the brass surface.

With a width of 210.00 cm and a depth of 160.00 cm, the outer dimensions require careful spatial planning prior to placement, particularly in rooms with low ceilings or restrictive entryways. The interior mattress platform sits at a standard height above the floor, supported by a system of transverse wooden slats running perpendicular to the side rails. These slats distribute weight evenly across the mattress foundation and prevent sagging in the center. The open space beneath the side rails allows for air circulation around the underside of the mattress.

Maintenance of the 4 POSTER BED 70BRASS requires standard furniture care routines. The mindi wood surfaces benefit from periodic dusting with a dry, soft cloth and occasional treatment with furniture wax or oil to preserve the moisture balance of the timber and prevent drying or cracking. The brass hardware can be cleaned using a damp cloth, avoiding abrasive chemical cleaners that might strip the protective sealant. Assembly is required upon delivery, involving the systematic connection of the side rails, headboard, footboard, and vertical posts using the included hardware fasteners.