Baby Crib Montana

The Baby Crib Montana is constructed entirely from solid mahogany, a hardwood known for its dense grain structure, resistance to warping, and deep reddish-brown coloration that darkens naturally over time. Measuring 150 centimeters in width, 79 centimeters in depth, and 110 centimeters in height, the furniture piece occupies a rectangular footprint suited for standard nursery layouts. The total volumetric displacement of the packaged unit measures 1.3000 cubic meters, reflecting the substantial lumber used in its structural frame.

The primary framework relies on solid mahogany posts at each corner, measuring approximately five centimeters square to provide vertical load-bearing strength. The side rails and headboard panels are assembled using traditional mortise and tenon joinery, secured with internal steel hardware that remains concealed from the exterior surfaces. Vertical slats run along both long sides of the crib, spaced at regular intervals of six centimeters to comply with standard safety clearances preventing infant entrapment. Each slat is individually dweled into the top and bottom rails, ensuring the side structures resist horizontal pushing forces from within the cot.

The mattress platform sits within the interior cavity, which accommodates standard mattress dimensions corresponding to the 150-centimeter width and 79-centimeter depth parameters. The base framework features multiple height adjustment slots, allowing the mattress platform to be lowered as the child gains mobility and the ability to pull themselves upright. Changing the platform height requires removing four metal bolts from the corner brackets and repositioning the internal wooden support beams into the alternative pre-drilled slots.

Mahogany surfaces receive a multi-step finishing process consisting of hand-sanding between applications of a clear, non-toxic lacquer. This protective coating seals the wood pores against moisture absorption while maintaining the natural texture and grain patterns of the timber. The finish contains zero volatile organic compounds, lead, or heavy metal additives, ensuring direct contact safety for infants who may touch or mouth the railing components. Edges and corners throughout the design are hand-rounded to a radius of three millimeters, eliminating sharp angles along the perimeter of the crib.

The base of the unit incorporates four integrated feet that lift the lower structural frame two centimeters off the floor surface, preventing direct contact with carpet or flooring moisture. The overall weight of the crib is distributed evenly across these four corner points. Assembly requires a standard hex key, which is included in the hardware package, and follows a step-by-step connection of the two solid end panels to the front and back slatted rails using the provided threaded steel inserts. Maintenance requires only a dry microfiber cloth for routine dust removal, avoiding abrasive chemical cleaners that could degrade the clear lacquer barrier on the mahogany wood.