Cabinet_wh_w100

The CABINET_WH_W100 is a square storage unit constructed entirely from solid teak wood. Measuring precisely 100 centimeters in width, 100 centimeters in height, and 40 centimeters in depth, this cabinet presents a balanced, cube-like silhouette suitable for a variety of interior configurations. The natural teak material displays distinct grain patterns and a warm brown hue, characteristic of the timber’s dense natural oil content and durability.

The exterior frame consists of thick teak planks assembled with visible joinery that highlights the structural integrity of the piece. The front facade features a symmetrical layout comprising two main cabinet doors. These doors are mounted on heavy-duty hinges designed to support the substantial weight of the solid wood panels. Each door is fitted with a minimalist wooden pull, integrated directly into the design of the face frame to maintain a flush profile across the front of the unit.

Inside the cabinet enclosure, the vertical space is divided by a fixed horizontal shelf, also made of solid teak. This division creates two distinct interior compartments of equal height. The upper and lower shelves measure 40 centimeters in depth and span the interior width of the unit, providing adequate clearance for standard storage boxes, books, tableware, or office supplies. The back panel of the cabinet is constructed from matching teak plywood, secured with recessed screws to ensure rigidity and prevent racking over extended periods of use.

The base of the CABINET_WH_W100 rests directly on four short, integrated block legs that lift the main body approximately five centimeters off the floor. This low-profile foundation distributes the weight evenly across the footprint of the cabinet while preventing direct contact between the side panels and floor surfaces. The total weight of the unit reflects its solid wood construction, requiring two people for safe lifting and positioning during installation.

The surface finish is treated with a clear matte sealant that penetrates the pores of the teak without forming a glossy film. This treatment protects the wood against moisture absorption and daily wear while preserving the natural texture and tactile qualities of the grain. Maintenance involves routine dusting with a dry microfiber cloth and occasional application of teak oil to sustain the moisture balance of the timber in dry indoor environments.

The hardware components, including the internal shelf supports and door fasteners, are made from corrosion-resistant metal. The assembly utilizes traditional woodworking joints reinforced with high-strength adhesives, ensuring that the frame remains stable under heavy loads. The top surface of the cabinet is flat and finished to the same standard as the doors, functioning as an additional display or placement area for objects up to the weight capacity of the internal structure.

In terms of spatial planning, the 40-centimeter depth allows the unit to fit comfortably in narrow hallways, dining rooms, home offices, or living areas without obstructing primary walkways. The 100-by-100-centimeter face provides a substantial visual presence without dominating smaller room layouts. The materials used in the CABINET_WH_W100 originate from managed plantations, ensuring traceability and compliance with standard timber harvesting regulations. The combination of solid teak framing, practical internal shelving, and a compact footprint defines the functional parameters of this storage solution.