Closet Door Dt.01

The CLOSET DOOR DT.01 is a single-panel interior door designed specifically for wardrobe and closet enclosures. Manufactured in a traditional Louvre model configuration, this architectural component features a series of horizontal wooden slats set at an angle to permit continuous airflow into enclosed storage spaces. This louvered construction prevents moisture accumulation and stagnant air inside wardrobes, making the model particularly functional for storing garments and linens that require ventilation.

Solid mahogany constitutes the primary material for the entire assembly. Mahogany timber is chosen for its dense cellular structure and natural dimensional stability, which resists warping under standard indoor humidity fluctuations. The wood grain displays a reddish-brown hue that deepens with age, featuring a straight to interlocked grain pattern with a fine, uniform texture. Each piece of timber used in the construction of the DT.01 is kiln-dried to a specific moisture content to prevent post-installation shrinking, cracking, or joint separation.

Physical dimensions for the unit measure 60.00 cm in width, 2.80 cm in thickness, and 226.70 cm in height. The 2.80 cm thickness provides sufficient structural rigidity to prevent bowing across the 226.70 cm vertical span, ensuring the door remains flush within its frame during operation. The total volumetric displacement of the packaged unit is 0.0380 cubic meters, while the total physical weight registers at 12.50 kilograms. This weight distribution allows standard residential interior hinges to support the door panel without sagging over extended periods of repeated opening and closing cycles.

The structural framework employs traditional joinery techniques, utilizing mortise and tenon joints at the corners of the stile and rail assembly. These interlocking wood joints distribute mechanical stress evenly across the frame corners, reducing reliance on metal fasteners that can loosen over time. The louvers are individually housed within precision-routed grooves along the interior edges of the vertical stiles, ensuring each slat remains securely fixed without rattling or shifting during movement.

The surface of the mahogany is sanded smooth to a fine grit finish, leaving the wood pores receptive to various finishing applications such as clear sealers, polyurethane, wood stains, or paint. The edges are squared and cleanly milled to facilitate straightforward installation with standard architectural hardware, including butt hinges, pivot systems, or sliding track mechanisms. Because the door ships without pre-drilled hardware bores, installers retain the flexibility to mount handles, knobs, or latch mechanisms at heights matching existing room configurations or specific ergonomic requirements.

Maintenance requirements for the CLOSET DOOR DT.01 involve routine dusting of the individual louvers using a dry cloth or a soft brush attachment. Periodic reapplication of a protective wood finish preserves the mahogany’s natural resistance to environmental wear. The structural design accommodates standard hardware tolerances, allowing for minor planing of the top, bottom, or side edges during fitting if structural openings deviate from standard square measurements. The louver slats are fixed in a stationary, downward-slanted orientation, which blocks direct visual sightlines into the closet interior while maintaining the required passage of air.