Barstool Oon With Arms

The Barstool Oon with Arms is a high-profile seating fixture constructed from solid mahogany wood, adhering to the traditional Thonet design lineage. This piece stands at a total height of 105.00 centimeters, with a width of 47.00 centimeters and a depth of 49.00 centimeters. It occupies a volumetric space of 0.3700 cubic meters per unit. The structural framework relies on steam-bent solid wood techniques characteristic of the Thonet style, allowing the mahogany material to form continuous curved components without joints at critical stress points.

Mahogany timber serves as the primary material for the entirety of the frame, including the legs, footrest rungs, backrest, and integrated armrests. This dense tropical hardwood exhibits a reddish-brown natural coloration that deepens with age and exposure to light. The grain pattern of the mahogany is straight to interlocked, possessing a medium texture with a natural medium luster. The density of the mahogany provides high impact resistance and structural rigidity, which is necessary for a barstool configuration that endures lateral forces from users sitting down, standing up, and resting their feet on the lower rungs.

The seating height aligns with standard bar-level surfaces, typically measuring between 75 and 80 centimeters from the floor to the top of the seat pan. The upper backrest incorporates a rounded, ergonomic hoop that extends outward to form continuous armrests on both the left and right sides. These armrests curve downward to meet the vertical supports, creating a closed-loop perimeter that supports the upper body. The backrest consists of curved wooden splats or a solid bentwood rail secured directly to the rear seat framing.

Beneath the seat, the frame features a reinforced wooden apron connected to four legs by mortise and tenon joinery. To ensure stability at the 105-centimeter height, four horizontal footrest stretchers are positioned between the legs at varying heights from the floor. These stretchers create a square stabilizing brace that prevents lateral wobble and provides a resting place for the user’s feet. The front footrest features a protective metal scuff plate or is positioned to withstand repetitive foot friction, preserving the mahogany finish over prolonged daily use.

The dimensions of 47.00 centimeters in width and 49.00 centimeters in depth allocate a compact footprint suitable for narrow counter spaces, kitchen islands, hospitality bars, and cafe seating layouts. The inclusion of arms adds approximately 5 to 8 centimeters to the overall usable width compared to armless variants, requiring careful spatial planning when calculating seating capacity per linear meter of counter space. The 0.3700 CBM measurement reflects the assembled volume of the stool, which must be factored into shipping container calculations and freight storage logistics.

Maintenance of the Barstool Oon with Arms involves routine dusting with a dry microfiber cloth and periodic cleaning with a damp cloth using mild, non-alkaline soap. The mahogany surfaces are sealed with a protective varnish or lacquer finish that resists moisture penetration and surface scratching. Solvents, abrasive pads, and silicone-based polishes should be avoided to prevent degradation of the original wood finish. The structural joints require occasional inspection to ensure that the wooden components remain tight and rigid under heavy commercial or residential use. The assembly is delivered fully constructed, with no secondary hardware installation required by the end user.