French Chair Antez

The French Chair Antez is a dining-height seating unit measuring 53.00 cm in width, 56.00 cm in depth, and 97.00 cm in total height. Designed following traditional French furniture archetypes, this model relies on classical proportions and exposed wooden framing. The primary structural material is solid mahogany, selected for its density, fine grain structure, and resistance to warping. The wood surface is shaped through manual carving and joinery techniques typical of classical European cabinet making, resulting in exposed structural members that define the chair’s profile.

The backrest follows a rounded oval silhouette, framed entirely in carved mahogany. The interior of the backrest features upholstered cushioning secured with tensioned internal webbing and high-density foam padding. This configuration maintains a firm vertical support surface while keeping the overall profile slender. The junction where the backrest meets the rear seat rail utilizes mortise and tenon joints, glued and reinforced to handle daily lateral loads.

The seat platform measures 53.00 cm across its widest point at the front rail, tapering slightly toward the backrest. It sits at a standard dining height, supported by a four-legged mahogany underframe. The front legs are turned on a lathe, featuring classical fluting and subtle tapering toward the foot, terminating in a modest collar detail. The rear legs exhibit a gentle outward rake, stabilizing the center of gravity and preventing tipping when the user leans backward. The side and front seat rails are dowel-jointed directly into the legs, creating a rigid rectangular box that bears the primary vertical weight distribution.

With a total weight of 7.50 kg, the chair can be moved across flooring surfaces without mechanical assistance. The occupied shipping volume of the unit measures 0.2200 cubic meters, a metric relevant for freight calculation and container consolidation. The mahogany frame has been sealed with a clear lacquer finish that highlights the natural reddish-brown tones and grain variations inherent to the hardwood species, while protecting the timber from ambient moisture absorption.

Upholstery fabric covers the front and back of the backrest as well as the top surface of the seat cushion. The fabric is secured to the mahogany frame using concealed steel tacks driven into pre-grooved channels in the wood. The seat cushion itself is built with a multi-layer foam core that limits sagging over extended periods of use. The perimeter of the upholstery is finished with matching double-welt cord piping, glued and stitched along the wooden boundary lines to conceal the fastening points.

Maintenance of the French Chair Antez requires standard wood care practices. The mahogany frame can be cleaned using a dry or slightly damp cloth, avoiding abrasive chemical cleaners that might degrade the lacquer seal. The upholstered sections require periodic vacuuming with a soft brush attachment to remove particulate debris from the fabric weave. Because the primary material is solid timber, placement should avoid direct, prolonged exposure to high-heat sources or extreme humidity fluctuations to prevent natural wood movement.

The structural design accommodates standard residential and commercial dining table heights. The armless configuration allows multiple units to be pushed closely together along the edge of a table, maximizing seating capacity in limited spatial layouts. The combination of dense mahogany framing and internal steel fasteners ensures structural integrity under continuous commercial or residential seating cycles.