Dining Chair Nigata

The DINING CHAIR NIGATA is constructed entirely from solid teak wood, a dense hardwood recognized for its high natural oil content and resistance to moisture, decay, and environmental stress. Teak requires minimal maintenance while maintaining structural integrity over decades of daily use. The wood features a natural grain pattern that varies slightly from piece to piece, showing straight, tight lines in some areas and subtle burls in others. The surface finish is sanded smooth by hand, removing all rough spots while preserving the tactile quality of the raw timber.

Measuring 56.00 centimeters in width, 85.00 centimeters in height, and 63.00 centimeters in depth, the chair is proportioned to fit standard dining tables with a surface height of 75 to 80 centimeters. The overall footprint occupies 0.2900 cubic meters of spatial volume per unit, a measurement relevant for freight calculation and spatial planning. Weighing 16.00 kilograms, the substantial weight prevents the chair from sliding unintentionally on hard flooring surfaces while remaining manageable for a single person to lift and reposition around a table.

The structural framework relies on traditional mortise and tenon joinery, secured without visible metal fasteners on the primary load-bearing surfaces. The four legs taper slightly downward from the seat frame to the floor, distributing the downward load evenly across the contact points. Two horizontal stretcher bars connect the front and rear legs approximately twenty centimeters above the floor, providing lateral bracing that resists side-to-side shear forces during the act of sitting down or pushing away from a dining surface.

The seat platform is integrated directly into the upper rail assembly, contoured with a slight hollow to distribute body weight across the wooden surface without relying on upholstered cushions. The backrest consists of vertical wooden slats set at a measured angle relative to the seat plane, supporting the lumbar and mid-back regions during extended sitting periods. The top rail of the backrest curves slightly along the horizontal axis, presenting a smooth edge where hands grip the chair when moving it into position.

Manufactured for indoor dining environments, the DINING CHAIR NIGATA functions reliably in residential dining rooms, commercial hospitality venues, and conference settings. The teak material reacts minimally to indoor humidity fluctuations, reducing the likelihood of joint loosening or wood splitting. Cleaning requires only a damp cloth to remove surface dust or spills, avoiding the need for chemical polishers or specialized conditioners. The density of the teak ensures that accidental impacts from table edges or adjacent furniture result in minimal denting or structural compromise.