Havana Club Chair With Leather

The Havana Club Chair with Leather is a freestanding armchair constructed from solid teak wood and upholstered panels of genuine leather. Measuring 75.00 centimeters in width, 78.00 centimeters in height, and 81.00 centimeters in depth, the furniture piece occupies a total volume of 0.4700 cubic meters. The frame relies entirely on sustainably harvested teak, a dense tropical hardwood known for its natural oil content and high resistance to moisture and decay. This specific timber selection yields a visible grain pattern featuring tight, straight lines and variations ranging from golden brown to deeper honey tones.

The structural skeleton of the chair uses mortise and tenon joinery, a traditional woodworking method that locks the wooden components together without relying solely on metal fasteners or adhesives. The front legs extend directly downward from the armrest supports, while the rear legs angle outward at a slight degree to distribute sitting weight evenly across the footprint of the chair. The teak frame is sanded to a smooth finish by hand, leaving the wood pores unsealed to preserve the tactile quality of the natural material rather than applying a heavy plastic-based varnish.

Suspended within the wooden perimeter are upholstered sections comprising a padded seat base and a raked backrest. The leather hide is stretched taut over high-density polyurethane foam padding, which provides firm resistance under compression. Natural markings, scars, and grain variations remain visible across the leather surface, indicating the genuine origin of the material. The hide is secured to the teak frame using rows of flush-set metal tacks along the rear and underside seams, keeping the mechanical fixings concealed from direct view.

The seating geometry features a width of 75 centimeters between the outer edges of the wooden armrests, providing ample lateral space for an adult user. The backrest is angled at approximately 110 degrees relative to the horizontal seat plane, supporting an upright yet relaxed posture. With a total height of 78 centimeters, the top edge of the backrest sits below standard dining table heights, positioning the chair firmly within lounge furniture categories. The depth of 81 centimeters accommodates a deep seating posture, allowing the user’s back to rest flush against the leather-upholstered support panel while leaving adequate thigh clearance.

Maintenance requirements for the Havana Club Chair with Leather correspond directly to its material composition. The teak wood frame benefits from periodic applications of teak oil to maintain its moisture resistance and prevent the surface from drying out in low-humidity environments. Dust and debris settle easily on the smooth wooden surfaces and can be removed using a dry microfiber cloth. The leather upholstery requires cleaning with a damp cloth and specialized leather conditioner to prevent cracking and maintain the flexibility of the hide over extended periods of use.

Transport and placement logistics require accounting for the fixed 0.4700 CBM volume, as the chair ships as a fully assembled unit rather than a flat-packed kit. The solid teak construction results in a substantial weight, ensuring the chair remains stable on hardwood floors, tiles, and low-pile carpets without sliding during use. The clearance underneath the seat frame allows for standard robotic vacuums and manual cleaning tools to pass beneath the structure. Each unit reflects the natural variances inherent in working with solid wood and organic leather, ensuring that no two production models share identical grain patterns or hide textures.