Dining Chair East Rattan

The Dining Chair East Rattan measures 54.00 cm in width, 60.00 cm in depth, and has a total height of 101.00 cm. Constructed entirely from natural rattan, this seating option weighs 5.00 kg and occupies a volume of 0.3200 m3 per unit. The physical architecture of the chair relies on traditional weaving techniques applied to pliable palm-like vines, creating a rigid structural grid that supports human weight while maintaining a low mass.

The vertical framework consists of thick, peeled rattan poles that form the primary load-bearing legs, backrest perimeter, and seat support. These vertical members are reinforced with secondary bindings made from thinner strands of split rattan, which are tightly wrapped around the structural joints to restrict lateral movement. The backrest extends upward to the 101.00 cm height mark, featuring a slightly curved profile that matches the natural alignment of the human spine. Vertical rattan reeds run parallel along the interior of the backrest frame, secured at the top and bottom rails to distribute pressure evenly across the upper back region.

The seat pan measures 54.00 cm across its widest horizontal plane and extends 60.00 cm forward from the base of the backrest. A dense basket weave pattern forms the seating surface, utilizing interwoven horizontal and vertical rattan strips. This woven matrix provides a semi-flexible surface that yields slightly under weight before stabilizing. The 60.00 cm depth accommodates standard dining table clearances, allowing users to sit upright with their feet flat on the floor while maintaining proper ergonomic positioning relative to standard table heights.

Four legs descend from the seat frame, tapering slightly toward the floor to distribute the 5.00 kg total weight across four distinct points of contact. The front legs measure straight down from the seat corners, while the rear legs angle outward at a slight rake to increase stability and prevent tipping when users lean backward. Horizontal stretcher bars connect the four legs approximately 20 cm above the floor level. These stretchers form a closed rectangular brace that locks the legs into a fixed geometric position, absorbing shear forces generated when the chair is pulled out or pushed in from a dining table.

Natural rattan material exhibits inherent tonal variations ranging from pale straw to deep honey brown, depending on the specific harvest conditions and sun exposure of the raw vines. The surface finish consists of a clear protective coat that seals the porous plant fibers against moisture absorption and daily abrasion without masking the underlying grain and texture. Each chair displays unique node markings and minor striations native to the botanical material, ensuring that no two units share identical surface patterns.

With a footprint of 0.3200 m3, the Dining Chair East Rattan fits standard spatial allocations around residential and commercial dining tables. The lightweight construction of 5.00 kg permits frequent repositioning by hand without requiring mechanical assistance or floor glides. Maintenance involves dry dusting with a soft-bristle brush or vacuum attachment to remove particulate matter from the woven crevices. The chair arrives fully assembled and ready for immediate placement on flat indoor flooring surfaces.