Dining Chair Serys

The DINING CHAIR SERYS is an architectural seating solution constructed entirely from solid wood. Measuring 62.00 cm in width, 80.00 cm in height, and 63.00 cm in depth, this furniture piece requires a spatial volume allocation of 0.3100 cubic meters for shipping and placement. The physical footprint provides a stable base supported by four vertical wooden legs, which are integrated directly into the seat frame to distribute weight evenly across the floor surface.

The primary material utilized in the fabrication of the DINING CHAIR SERYS is selected hardwood, chosen for its structural density and resistance to warping under daily loads. The grain pattern of the wood remains visible through the finish, displaying the natural organic striations inherent to the raw material. Each component of the chair, including the legs, seat pan, and backrest, is milled to specific tolerances before assembly. The joinery employs traditional wood-to-wood fastening techniques, relying on dowels and mortise-and-tenon joints rather than visible metal brackets, which maintains a continuous wooden surface profile throughout the main structural junctions.

The backrest of the DINING CHAIR SERYS curves continuously from left to right, forming a semi-enclosed perimeter that supports the occupant’s lower and mid-back regions. This curved wooden back panel is connected securely to the rear legs and seat base via reinforced internal bracing. The depth of 63.00 cm accommodates the rake of the backrest, ensuring that the occupant sits at an angle that aligns the spine naturally with the vertical plane of the chair. The width of 62.00 cm across the front allows adequate clearance for various body types, preventing lateral restriction while seated at a standard dining table height.

The seat platform is flat and constructed from matching wood planks joined edge-to-edge. The height of 80.00 cm measured from the floor to the top of the backrest places the upper terminus well below standard table surfaces, allowing the chair to slide underneath most dining tables when not in use. The armrests, or the extended sides of the backrest structure, provide a resting point for elbows at a height proportional to the overall vertical dimension of 80.00 cm. The base clearance allows for routine floor maintenance beneath the chair footprint without requiring the unit to be disassembled.

Regarding logistics and delivery specifications, the DINING CHAIR SERYS has a packed volume of 0.3100 CBM. This metric dictates storage requirements in a warehouse environment and transport capacity within freight vehicles. The unit is delivered fully assembled, bypassing the need for hex keys, threaded bolts, or consumer-side mechanical installation. The solid wood construction results in a substantial physical weight that keeps the chair firmly planted on hard flooring or low-pile carpets, preventing unintended sliding when an occupant sits down or stands up.

Maintenance of the DINING CHAIR SERYS involves standard wood care protocols. The surface finish repels moisture from minor spills, which can be wiped away using a dry or slightly damp cloth. Avoidance of abrasive chemical cleaners preserves the integrity of the topcoat. The feet of the chair make direct contact with the floor, so the application of felt pads is recommended on delicate surfaces such as polished hardwood or natural stone to prevent scratching during movement. The structural integrity of the DINING CHAIR SERYS relies on the stability of its hardwood components, making it suitable for high-frequency residential dining rooms, conference spaces, or hospitality environments where solid wood seating is specified for heavy daily usage.