Sun Lounger Double Flip With Left Arm With Wheels – 200x70x36

The Sun Lounger Double Flip with Left Arm with Wheels is a specialized outdoor daybed measuring 200 cm in width, 70 cm in depth, and 36 cm in height, constructed entirely from solid teak wood. With a total volume displacement of 0.5040 cubic meters, this lounger is built for permanent placement in residential gardens, poolside decks, and hospitality resort environments.

Teak wood serves as the primary structural material for this furniture piece. Teak contains high levels of natural rubber and oil, which render the timber resistant to moisture penetration, fungal decay, and insect infestation. The raw material undergoes a drying process to stabilize the moisture content before machining, minimizing the risk of warping or cracking when exposed to fluctuating outdoor temperatures and direct sunlight. Over time, unfinished teak exposed to ultraviolet light develops a silvery-grey patina on the surface fibers, while the underlying structural integrity remains unaffected. Maintenance involves occasional cleaning with mild soap and water to remove surface dirt, and sanding can restore the original golden-brown honey color if preferred.

The dimensions of the lounger accommodate a full reclining posture for an adult user. The 200 cm length provides adequate horizontal space for lying flat, while the 70 cm width offers lateral support without occupying excessive deck footprint. The 36 cm height positions the sleeping surface at a standard bench level, facilitating easy entry and exit from the lounger.

Functionality is defined by several mechanical features integrated into the wooden frame. The backrest utilizes a multi-position double flip mechanism, allowing users to adjust the recline angle from completely flat to fully upright for reading or sitting. This adjustment hardware consists of marine-grade metal brackets recessed into the teak slats, operating via a manual lift-and-slot action.

A single armrest is positioned on the left side of the lounger from the perspective of a seated occupant. This left arm provides a fixed point of support and a structural boundary for the upper torso. The inclusion of only one armrest on the left side allows multiple loungers to be placed side-by-side in a configuration without obstructive barriers between adjacent units, or provides an open side for lateral transfer.

Mobility is provided by two wheels integrated into the frame structure at the head end of the lounger. These wheels are recessed into the wooden legs and turn on corrosion-resistant axles. To relocate the furniture, a user lifts the foot end of the 200 cm frame—which lowers the weight onto the wheels—and rolls the unit across hard surfaces such as stone patios, wooden decking, or concrete pathways. The wheels eliminate the need to lift the entire weight of the teak structure during rearrangement.

The bed surface consists of closely spaced solid teak slats fastened to the internal frame using waterproof adhesives and stainless steel hardware. The spacing between the slats allows for air circulation beneath a cushion or directly against the body, preventing moisture accumulation during humid weather conditions. The joints utilize traditional mortise and tenon joinery secured with teak dowels, distributing mechanical stress evenly across the frame during use.

Shipping and logistics specifications include a packed volume of 0.5040 m3 per unit, relevant for container loading calculations and freight cost estimation. The unit arrives fully assembled or in modular sections depending on shipping protocols, with all pre-drilled holes and mechanical joints aligned for immediate setup. The combination of dense hardwood, directional mobility wheels, adjustable backrests, and a single-arm configuration establishes the functional parameters of this outdoor lounger for architectural and landscape specification.